How To Clean Your Exxus Vape Go Plus Concentrate Vaporizer

17. Sep 2025
How To Clean Your Exxus Vape Go Plus Concentrate Vaporizer

Interested in keeping your Exxus Vape Go Plus Concentrate Vaporizer squeaky clean and always at 100% effectiveness? Well you're in luck because today the Exxus Vape Crew is here to share our expert tips on how to keep our favorite dabbing device ripping and roaring.

Keep reading in this Exxus Insider Exclusive to make cleaning your Go Plus easier than ever and enjoy clouds that are hitting at maximum potency, flavor, and volume. By the end of this briefer you’ll have a definitive idea on how to clean your device and enjoy better dabs!!!

Preparing Your Exxus Go Plus For Cleaning

In order to get started with cleaning your Go Plus, it’s good to go over the 3 Ps of proper cleaning - power down your device, prepare your cleaning supplies, and place each individual component somewhere safe.

Starting with the easiest and most essential, whenever you want to clean your Exxus Go Plus you must always power off your device. You never want the battery operating while cleaning, as this can cause serious issues if moisture is able to seep in while on. That’s why you should always double check your Go Plus is off before moving onto the other steps.

Next we have the practical step of preparing the cleaning supplies you require. These typically include a mixture of swabs, wipes, paper towels, and isopropyl alcohol. While there is no one way to go about cleaning, these are the items that we’ve found have the best effect.

A great idea to make this step easier is to invest in a convenient container that houses your supplies, that way you can always grab that and know you have everything in one place. Even a gallon plastic bag can work perfectly for this, giving you a ready to go “cleaning kit” for just these moments.

Finally, when cleaning your Go Plus you must disassemble the carb cap, glass percolator, and heating chamber before placing them all somewhere safe. We recommend using a folded towel to place components, as this is both a soft and absorbent surface for them to rest.

To do so, first remove the carb cap by gently pulling off the rubber tether, once off you can detach the tether entirely and place your carb cap to the side. From here carefully pull off the glass percolator, it utilizes a magnetic attachment system, so with a little tug it will pop right off.

Once the glass is off, you can unscrew your heating chamber to reveal the threaded connection beneath and place your chamber on the towel. Now your Exxus Go Plus is all ready for a deep cleaning, with all of its important areas far more accessible to you.

Exxus Go Plus Glass on display platform

Cleaning Your Exxus Go Plus Glass

Starting off with the smallest component, to clean your Exxus Vape Go Plus Carb Cap take some isopropyl alcohol and dampened a piece of paper towel, before using it to scrub down the carb cap.

Pay special attention to the bottom part, as this is the area where reclaim can build up over time, even if it’s just a small bit - taking the time to clean it now is going to pay off in dividends when your sessions stay smooth and no pesky clogs begin to develop.

Moving on to the largest frog on the plate, we have the task of cleaning your Exxus Vape Go Plus Glass Percolator, an intricate piece of borosilicate glass that has a few twists and turns that require extra attention in order to properly be cleaned.

Make sure to go slow when cleaning your Glass Percolator, as you want to always maintain a strong grip to ensure things don’t slip out of your hands. This is absolutely a case of the tortoise beating the hare, so always make sure to chill out when cleaning with some tunes or a fun tv show in the background to keep stress low.

Start by cleaning the inside of the percolator that covers your heating chamber, this can be exposed to tons of concentrate and will be an area you want to scrub clean. Don’t worry if you have to give it a couple of passes, concentrates, especially once heated, are a real piece of work and will require some serious elbow grease.

Once you’ve cleaned the chamber cover, you can move onto wiping down the rest of your glass with a paper towel and utilizing small q-tips to get the harder to reach inner spots.

If you need to really achieve a deep inner cleaning, you can always fill a bag with isopropyl alcohol and fully submerge your glass percolator within. Let your glass soak for several hours, and then take it out to enjoy your super cleaned fresh glass.

Perfect for cleaning both of these glass pieces, we have the ultra convenient Wulf Mods Wipes Alcohol Cleaning Wipe 100pk. These Wulf Wipes come preloaded with a 70% isopropyl alcohol solution and in individual packages, letting you easily open one up for a freshly dampened cloth that makes short work of even the biggest of concentrate stains / chazz.

Exxus Go Plus Heating Chamber lying down for a closeup of the inside

Cleaning The Exxus Go Plus Quartz Chamber

To clean your Exxus Vape Go Plus Replacement Heating Chamber there are three distinct areas you need to review, the bottom threaded connection, the outside, and the inside of your chamber.

First start by wiping down the bottom of your chamber to ensure the connection is clear from materials and help electricity flow properly. Then move onto the outside, simply use a paper towel or a Wulf Wipe to fully wipe it down and clean off any spatter that’s accumulated.

Next you can turn to the inside of the chamber, as this is where your concentrates are actually vaporized, you’re going to have to put in a bit more effort on this step. Take a q-tip or swab and dampen it with some isopropyl alcohol before gently rubbing down the inside of the chamber.

Try to use a swirling motion and make sure to complete several passes so that the isopropyl alcohol can properly break down the old left over concentrates. A good method is to alternate between dampened and dry swabs to gradually work away at the stains with the good cop and bad cop of concentrate cleaning.

For some extra heavy duty swabs, take a look at the Wulf Mods Cotton Swab 300pk with their choice of two different tips allowing for a standard rounded top and a pointed tip that can reach the extra hard to reach creases of your heating chamber.

This makes these perfect for digging out the corners and removing the concentrate build up that can occur right at the very bottom of your heating chamber. Removing it allows for much better heating and ensures you're always getting 100% from your materials.

Exxus Go Plus battery base cleaned and balancing on a knee

Cleaning The Exxus Go Plus Body

With all of the hardest cleaning tasks accomplished, you can finish things up by wiping down the base battery of the Go Plus. Simply utilize a paper towel and scrub away at any dirt or finger prints you notice until the base looks properly clean to you.

Make sure to also take a look at the Go Plus’s threaded connection and give it a pass with one of your damped q-tips much like you would with the heating chamber, and swirl it around to ensure no sticky materials are gunking up the works.

When cleaning take care around the buttons, as you don’t want to let excess moisture seep in or have it accidentally turn on through errant clicks. Other than this, taking care of the battery itself is fairly straightforward and a good way to wind things down after cleaning the harder areas.

Leave Your Go Plus To Dry

Finally, once you’ve cleaned all of the components of your Exxus Go Plus - you must now leave them on the towel and let them properly dry. While this may take a while, never skip this step as you don’t want to operate your device while cleaning materials like isopropyl alcohol linger.

While this does require patience, we recommend having a back up cartridge vaporizer on deck like our Exxus Snap DLX 510 Voltage Battery on deck so that you can put your feet up and enjoy some zesty clouds while you wait for everything to properly dry.

No matter how you pass the time, always remember that this is one step you absolutely cannot skip and in no way should you EVER turn on your Exxus Go Plus in the presence of moisture, despite how much you want to get back to dabbing!

So either have a secondary cartridge vaporizer on deck, put on your favorite show, hit the gym, or any other number of activities that will distract you until your Go Plus is back in action!

Man holding Exxus Go Plus in front of pink studio background

Enjoy Crystal Clear Clouds

Now that your Exxus Vape Go Plus Concentrate Vaporizer is fully clean, it’s time for you to enjoy some extra smooth, tasty, and potent clouds from it! Load up all the globs you can handle and kick back while you experience your concentrates at their very best.

Thanks for stopping in with the Exxus Crew and make sure to check out the rest of our vaporizer tips and tricks over at our Exxus Vape Vaporizer Blog! Stay cloudy out there y’all!